| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| It's still a work in progress... http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=40351 |
Page 1 of 1 |
| Author: | sixstrings [ Mon May 13, 2013 8:45 pm ] |
| Post subject: | It's still a work in progress... |
I sanded and ebonized a fretboard on the neck and didn't get the masking tape sealed well enough. The result was as you probably guessed... bleed thru onto the neck. I sanded and repainted the neck and now want to sand the ebony stain back to the original wood. The bare wood fretboard would make for a nice contrast to the dark neck. My question: Once I sand to bare wood can I apply a fretboard oil directly to the wood? |
|
| Author: | SteveSmith [ Fri May 17, 2013 7:55 am ] |
| Post subject: | Re: It's still a work in progress... |
Yes but I wouldn't do it until all the finishing is complete |
|
| Author: | martintaylor [ Tue Jul 02, 2013 4:48 am ] |
| Post subject: | Re: It's still a work in progress... |
SteveSmith wrote: Yes but I wouldn't do it until all the finishing is complete +1 I use lemon oil on the fretboard but it is the last thing I do before stringing up. All other finishing is complete before I oil the fretboard. And the lemon oil is the only finish I give the fretboard but I do use Australian timber (Mulga wood) and it only needs lemon oil. |
|
| Author: | Rodger Knox [ Tue Jul 02, 2013 2:48 pm ] |
| Post subject: | Re: It's still a work in progress... |
Walnut oil may be a better choice, I don't believe lemon oil is a drying oil. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|